CCMS Power Supplies

Product Details:

• OUTPUTSEquipment supply - 13.8V at 1.0 Amps max. Battery supply - 13.8V at 1.0A +- 0.20A max. A battery is to be directly floated across the load, however, it has separate terminals
• OUTPUT VOLTAGE REGULATION Load output (with the battery disconnected) will be regulated within +-2%, with a battery connected will follow the battery voltage
• RIPPLE & NOISE Ripple on output load terminal (with the battery disconnected) will be less than 150mV. Noise will be less than 300mV Pk-Pk
• BATTERY CHARGING Battery charging will take place with constant voltage, constant current,
• Maximum charging current of the battery is limited to 1.0A +- 0.20A. Maximum Charging Voltage is Set at 13.8V +- 2%

• OUTPUT OVERLOAD AND SHORT CKT PROTECTION
• BATTERY REVERSE POLARITY PROTECTION

INDICATIONS

• MAINS ON INDICATOR Will be ON when AC is available
• BATTERY ON INDICATOR
  Will be ON when Battery is supplying power to the Equipment
• BATTERY LOW INDICATOR Will be ON when a Battery voltage is below 10.40V to 10.80V
• COOLING Free air convection cooling

ENVIRONMENT

• TEMPERATURE Operation -5 to +50 C, Storage -5 to +60 C
• HUMIDITY
  Operating 5% RH to 85% RH non - condensing, Storage 5% RH to 95% RH non - condensing

PRODUCT SAFETY

• DI - ELECTRIC VOLTAGE WITHSTAND TEST 3.0 KV AC rms at 50Hz for one minute ( trip current set at 5mA).1) Between INPUT and OUTPUT

Product Details: